Panasonic DMC-GH3KBODY Owner's Manual page 48

Preparation
[Economy]
•
Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode].
•
To turn the monitor/viewfinder on again, press any button or touch the monitor.
•
When the eye sensor automatic switching
canceled.
•
[Economy] does not work in the following cases.
–
When connecting to a PC or a printer
–
When recording or playing back motion pictures
–
During a slide show
–
[Multi Exp.]
•
When using the AC adaptor (optional), [Sleep Mode] is disabled.
[Battery Use Priority]
•
Refer to P268 for details.
[USB Mode]
You can conserve the battery life by setting these menus.
Also, it will turn off the monitor/viewfinder automatically when not
in use to prevent discharge of the battery.
[Sleep Mode]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF]
[Auto LVF/Monitor Off]:
The monitor/viewfinder is automatically turned off if the camera
has not been used for the time selected on the setting.
[5MIN.]/[2MIN.]/[1MIN.]
(P54)
[BODY]/[BG]
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [Select on connection]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
is activated, [Auto LVF/Monitor Off] is
48