Motion Picture
How to set focus when recording a motion picture (Continuous AF)
Focusing changes depending on the Focus Mode setting and the [Continuous AF] setting
in the [Motion Picture] menu.
Focus Mode
AFS/AFF/AFC
MF
¢ When [Continuous AF] is set to [OFF], the focus is locked to the position set at the start of
recording.
•
Depending on the recording conditions or lens used, operational sound may be recorded when
the Auto Focus is operated while recording a motion picture. It is recommended to record with
[Continuous AF] in the [Motion Picture] menu set to [OFF], if the sound of operation bothers you
to avoid recording the lens noise.
•
When operating the zoom when recording motion pictures, it may take time to come into focus.
Recording Motion Picture
1
Start recording by pressing the motion
picture button.
A Elapsed recording time
B Available recording time
•
Recording of motion picture appropriate for each
mode is possible.
•
The recording state indicator (red) C will flash while recording
motion pictures.
•
If approximately 10 seconds elapses without an operation
being performed, part of the display will disappear. Press
[DISP.] or touch the monitor to make the display reappear.
•
When recording a motion picture, do not cover the microphone
with your fingers or other objects.
•
Release the motion picture button right after you press it.
2
Stop the recording by pressing the motion picture button again.
The camera automatically keeps focusing on subjects during
¢
recording.
•
To readjust the focus, press the shutter button halfway.
You can focus manually.
Settings
A
3
3
3
s
s
s
C
1
1
37
37 37
R
R
m
m
s
s
B
180