Panasonic DMC-GH3KBODY Owner's Manual page 52

Preparation
[Reset Wi-Fi Settings]
•
Always reset the camera when disposing or selling it to prevent personal information saved
within the camera from being misused.
•
Always reset the camera after making a copy of personal information when sending the camera
in to be repaired.
¢ (Excluding [LUMIX CLUB])
[Pixel Refresh]
•
Imaging device and image processing is optimized when the camera is purchased. Use this
function when bright spots that do not exist in the subject get recorded.
•
Turn the camera off and on after the pixels are corrected.
[Sensor Cleaning]
•
Dust Reduction Function will operate automatically when the camera is turned on, but you can
use this function when you see dust.
[Format]
•
Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not
turn the camera off during formatting.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
If the card cannot be formatted, consult Panasonic.
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
Reset all settings in the [Wi-Fi] menu to factory default settings.
(P242)
It will perform optimisation of imaging device and image
processing.
Dust reduction to blow off the debris and dust that have affixed to
the front of the imaging device is performed.
(P302)
The card is formatted.
Formatting permanently deletes all data on your memory
card. Please be sure all pictures and motion pictures are
saved elsewhere before using this feature.
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
¢
52