Connecting to other equipment
Transferring pictures to a PC
∫
Preparations:
Install "PHOTOfunSTUDIO" to the PC.
1
Connect the computer and camera with the USB connection cable
(supplied).
•
Please turn this unit on and your PC before connecting.
•
Turn the monitor toward you.
•
Check the directions of the connectors, and plug them straight in or unplug them
straight out. (Otherwise, the connectors may bend out of shape, which will cause a
malfunction.)
•
Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (DMW-USBC1: optional).
A USB connection cable (supplied)
B Align the marks, and insert.
2
Press 3/4 to select [PC], and then press [MENU/SET].
•
If [USB Mode]
automatically connected to the PC without displaying the [USB Mode] selection screen.
•
When the camera is connected to a PC while [USB Mode] is set to [PictBridge(PTP)], a
message may appear on the PC screen. In that case, close the message, and remove
the USB connection cable safely (P258), and then set the
3
Copy the images to a PC using "PHOTOfunSTUDIO".
•
Do not delete or move copied files or folders in Windows Explorer. When viewing in
"PHOTOfunSTUDIO", you will not be able to play back or edit.
•
Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery
power becomes low while the camera and the PC are communicating, the alarm beeps.
"
Refer to
Disconnecting the USB connection cable safely
USB connection cable. Otherwise, data may be destroyed.
•
Before connecting or disconnecting the AC adaptor (optional), turn the camera off.
•
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
(P48)
is set to [PC] in the [Setup] menu in advance, the camera will be
[USB Mode]
"
(P258)
before disconnecting the
to [PC].
257