Basic
Taking a Still picture
•
Set the drive mode dial to [
1
Select the Recording Mode.
2
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
•
Aperture value and shutter speed are displayed. (It
will flash in red if the correct exposure is not
achieved, except when set to flash.)
•
When the image is correctly focused, the picture
will be taken, since the [Focus/Release Priority]
(P55)
is set initially to [FOCUS].
Focus Mode
Focus
Focus indication
AF area
Sound
Focus Mode
Focus
Focus indication
AF area
Sound
¢1 When AF Mode is set to [
displayed momentarily while pressing halfway.
¢2 A beep will be emitted when focus is first achieved during the pressing halfway.
•
When the brightness is insufficient for [AFF] or [AFC], the camera will operate as if
[AFS] has been set. In this case, the display will change to the yellow [AFS].
3
Press the shutter button fully (push it in
further), and take the picture.
single)
] (
.
(P84)
When the subject is
focused
C On
D Green
Beeps 2 times
When the subject is
focused
C On
D Green
¢1
Beeps 2 times
], the first AF area at which focus is achieved may be
D
2.8
2.8
2.8
60 60
60
AB
AFS
When the subject is not
focused
Blinks
—
—
AFF/AFC
When the subject is not
focused
Blinks or Off
—
—
¢2
C
68