Panasonic DMC-GH3KBODY Owner's Manual page 275

Lumix gh3 body only, 16 megapixel digital single lens mirrorless camera (no lens)
Hide thumbs Also See for DMC-GH3KBODY:
Table of Contents

Advertisement

Others
[Memory Card Error]/[Memory card parameter error]/[This memory card cannot be used]
> Use a card compatible with this unit.
SD Memory Card (8 MB to 2 GB)
SDHC Memory Card (4 GB to 32 GB)
SDXC Memory Card (48 GB, 64 GB)
[Insert SD card again]/[Try another card]
An error has occurred accessing the card.
> Insert the card again.
> Insert a different card.
[Read Error/Write Error
Please check the card]
It has failed to read or write data.
> Remove the card after turning this unit off. Insert the card again, turn this unit on, and try
to read or write the data again.
The card may be broken.
> Insert a different card.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
> If you want to delete some pictures, format the card after saving necessary data on a PC
etc.
(P52)
> Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the
card]
Use a card with SD Speed Class with "Class 4" or more for [AVCHD]/[MP4] motion picture
recording, and use "Class 10" for [MOV].
If recording stops even by using a card of the above specified SD Speed Class, the data
writing speed is decreasing. We recommend you make a backup, and then format (P52).
Depending on the type of the card, motion picture recording may stop in the middle.
[A folder cannot be created]
A folder cannot be created because there are no remaining folder numbers that can be used.
> Format the card after saving necessary data on a PC etc.
in the [Setup] menu after formatting, the folder number is reset to 100.
[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect.
This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer. (P257,
260)
(P31)
(P52)
If you execute [No.Reset]
(P51)
(P49)
275

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-gh3

Table of Contents