Changing Flash Mode - Panasonic DMC-GH3KBODY Owner's Manual

Recording

Changing Flash Mode

Applicable modes:
Set the built-in flash to match the recording.
•
Open the flash.
1
Select [Flash] in the [Rec] menu.
2
Press 3/4 to select [Flash Mode] and then press [MENU/SET].
3
Press 3/4 to select the item and then press [MENU/SET].
Item
([Forced Flash On]) The flash is activated every time regardless of the recording
‰
([Forced On/
Red-Eye])
([Slow Sync.])
([Slow Sync./
Red-Eye])
([Forced Flash Off]) The flash is not activated in any recording conditions.
Œ
¢1 You can adjust the flash output only when [Firing Mode] in [Flash] is set to [TTL].
The flash is activated twice. The interval between the first and second flash is
longer when [
flash is activated.
Shutter speed for each flash setting
∫
Flash setting
‰
1/60
¢2 This becomes 60 seconds in Shutter-Priority AE Mode and B (Bulb) in the Manual Exposure Mode.
¢3 This becomes B (Bulb) in the Manual Exposure Mode.
•
When the flash is activated the fastest shutter speed that can be selected is 1/160 of a second.
•
In Intelligent Auto (
scene.
conditions.
•
Use this when your subject is back-lit or under
¢1
fluorescent light.
When taking pictures against a dark background landscape,
this feature will slow the shutter speed when the flash is
activated. Dark background landscape will appear brighter.
¢1
•
Use this when you take pictures of people in front of a
dark background.
•
Using a slower speed can cause motion blur. Using a
tripod can enhance your photos.
•
Use this when you take pictures in places where the use
of flash is not permitted.
•
Close the flash to turn it off when the built-in flash is
used.
] or [ ] is set. The subject should not move until the second
Shutter speed (Sec.)
¢2 to 1/160th
or ) Mode, shutter speed changes depending on the identified
(P37)
Description of settings
Flash setting
Œ
Shutter speed (Sec.)
1 to 1/4000th
¢3
60 to 1/4000th
125