Panasonic DMC-GH3KBODY Owner's Manual page 156

Recording
Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto
∫
Bracket
1
Select [Auto Bracket] in the [Rec] menu.
2
Press 3/4 to select [Single/Burst Settings], [Step] or [Sequence] and then
press 1.
3
Press 3/4 to select the setting and then press [MENU/SET].
Item
[Single/Burst Settings]
[Step]
[Sequence]
•
You can take one picture at a time when set to [
•
You can continuously take pictures up to set numbers when set to [
•
Exit the menu after it is set.
•
When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
•
The exposure may be compensated incorrectly, depending on the brightness of the subject.
•
When taking pictures continuously using Auto Bracket with [i.Resolution] set to [EXTENDED], it
may take time to record all the set number of pictures.
•
Auto Bracket is disabled in the following cases.
–
[Glistening Water]/[Glittering Illuminations]/[Soft Image of a Flower] (Scene Guide Mode)
–
[Miniature Effect]/[Soft Focus]/[Star Filter] (Creative Control Mode)
–
When White Balance Bracket is set.
–
When recording motion pictures
–
When recording using the flash
–
When [HDR] is set to [ON]
–
[Multi Exp.]
–
When using [Time Lapse Shot]
(P37)
Settings
[ ] (single)
[ ] (burst)
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[3•1] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)
[5•1] (5 pictures)
[7•1/3] (7 pictures)
[7•2/3] (7 pictures)
[7•1] (7 pictures)
[0/`/_]
[`/0/_]
].
].
156