Others
The recorded picture is whitish.
•
Picture might look whitish when lens or image sensor gets dirty with fingerprints or similar.
> If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft, dry
cloth.
> Refer to
P302
when the image sensor gets dirty.
The recorded picture is too bright or dark.
> Check that the exposure is correctly compensated.
•
Is the AE Lock
(P151)
Multiple pictures are taken at one time.
> Cancel the settings of White Balance Bracket (P139).
•
Is the self-timer
(P157)
The subject is not focused properly.
•
The subject is beyond the focus range of the camera.
•
There is camera shake (jitter) or the subject is moving slightly.
•
Is [Focus/Release Priority] in the [Custom] menu set to [RELEASE]?
In this case, the picture may not be properly focused even if [AFS], [AFF] or [AFC] in Focus
Mode is set.
•
Is [Shutter AF] in the [Custom] menu set to [OFF]?
•
Is the AF Lock
(P151)
The recorded picture is blurred. The Optical Image Stabilizer is not effective.
•
The shutter speed will become slower and the Optical Image Stabilizer function may not work
properly when taking pictures especially in dark places.
> We recommend holding the camera firmly with both hands when taking pictures.
> We recommend using a tripod and the self-timer
shutter speed.
•
Are you using a lens which supports the Stabilizer function?
Taking pictures using White Balance Bracket is not possible.
•
Is there any memory remaining on the card?
applied incorrectly?
set to [
]?
applied incorrectly?
(P133)
(P69)
(P117)
(P55)
(P53)
(P157)
when taking pictures with a slow
(P19)
(P65)
287