Image Control - Kyocera KM-4230 Instruction Handbook Manual

2. Printer Driver for WindowsNT
I Image Control:
[Image Control] allows you to place printed pages on top of one another and fold them, resulting in a magazine or pamphlet effect.
Selection can be made in the [Change 'Image Control' Setting] area. The documents will be bound along the left edge if [Book-Left**] is
selected, and bound along the right edge if [Book-Right**] is selected.
The default is [Off].
[Booklet Mode] .......................... If a duplex unit has been installed, the user will be able to print booklet style documents. In booklet
* [Booklet] allows only originals sizes of A5, A4 and Letter. The size of the papers to be used will be A4, A3 and Ledger, respectively.
Even if the orientation is changed within the same file, printing will be carried out so that there will be no blank pages.

Image Control

Off
Booklet-Left A3
Booklet-Left B4
Booklet-Left Ledger
Booklet-Right A3
Booklet-Right B4
Booklet-Right Ledger
Booklet-Left A3 (Booklet Stitch)
Booklet-Left B4 (Booklet Stitch)
Booklet-Left Ledger (Booklet Stitch)
Booklet-Right A3 (Booklet Stitch)
Booklet-Right B4 (Booklet Stitch)
Booklet-Right Ledger (Booklet Stitch)
Staple-Front
Staple-Center
Staple-Rear
Punch-2holes
Punch-3holes
Punch-4holes
Staple-Front & Punch-2holes
Staple-Front & Punch-3holes
Staple-Front & Punch-4holes
Staple-Center & Punch-2holes
Staple-Center & Punch-3holes
Staple-Center & Punch-4holes
Staple-Rear & Punch-2holes
Staple-Rear & Punch-3holes
Staple-Rear & Punch-4holes
printing, the pages are reordered and printed two-up on each side of a sheet of paper.
2-16