Kyocera KM-4230 Instruction Handbook Manual page 9

Select the printer you are using, then click Next.
5
The language to be used can be selected. Select the desired language from the box,
6
then click Next.
Select the driver type.
7
From the list, select the type of driver to be installed, then click Next.
Select the connection type: Local or Network.
8
• Local: The printer is connected directly to the parallel port.
• Network: The printer is connected to the printer via network (using a network inter-
face).
* If Local is selected, proceed to step 10. If Network is selected, proceed to step 9.
Enter the network queue name or the path for the network queue in the box.
9
To select another network queue name, press Browse.
If you are going to use a local port for the network queue, click the check box dis-
played below, then proceed to step 10.
Otherwise, proceed to step 11.
3. Installing the Printer Driver
9