Paper; Paper Acceptable For The Drawer; Paper Acceptable For The Stack Bypass Tray; G Setting Envelopes In The Stack Bypass Tray - Kyocera KM-4230 Instruction Handbook Manual

4. Paper

(1) Paper acceptable for the drawer

• Plain paper (64 g/m
• Recycled paper (64 g/m
• Color paper (64 g/m
* Acceptable weight: 64 g/m
* Acceptable sizes: 11" x 17", 8 1/2" x 14", 11" x 8 1/2"
* For information regarding setting paper, refer to the Instruction Handbook for your
copier.

(2) Paper acceptable for the stack bypass tray

• Plain paper (64 g/m
• Recycled paper (64 g/m
• OHP transparencies: 25 sheets
• Postcard: 25 sheets
• Envelopes (COM-10, Monarch): 10 sheets
* Acceptable weight: 45 g/m
* Acceptable sizes: 11" x 17", 8 1/2" x 14", 11" x 8 1/2"
It is additionally possible to set custom size paper other than those sizes noted
above as long as the dimensions of that paper are within:
Width: 3 7/8" - 11 5/8", Length: 5 3/4" - 17"
* When using OHP transparencies, flip through them to separate the sheets before
setting them into the stack bypass tray.
* For information regarding setting paper, refer to the Instruction Handbook for your
copier.

G Setting envelopes in the stack bypass tray

Carry out the following procedure when setting envelopes in the stack bypass tray. Be
sure also to enter into the printer's operation panel the size of the envelope as it
corresponds to the envelope type. (Refer to the sizes at right and carry out the follow-
ing procedure to enter the appropriate size in the operation panel of the printer.)
Open the stack bypass tray.
1
2 ): 500 sheets
2 ): 500 sheets
2 ): 500 sheets
2 - 80 g/m 2
2
): 100 sheets
2
): 100 sheets
2 2
- 200 g/m
Envelope Type Size That Should Be Entered
COM-10 9 1/2" x 4 1/8"
Monarch 7 1/2" x 3 7/8"
11