Print Quality - Kyocera KM-4230 Instruction Handbook Manual

2. Printer Driver for WindowsNT
I Print Quality:
Use this setting when you want to enable department management from the printer's touch panel. This allows you to check the number of
prints made for each department.
If the [management code] selected in the [Change 'Print Quality' Setting] area does not match the one set on the printer, printing will not
be performed. If [Management Code Off] is selected, the number of prints for each department will not be checked.
The default is [Management Code Off].
* Printing will not be performed even if a DOS command (e.g. COPY command) is sent directly, i.e. not via the printer driver, to cause the
printer to print.
2-15