Cabletron Systems SmartSwitch 9000 Appendix page 4

9F426-02 Module Specific Information
FNB Configuration
The FNB Configuration Menu (Figure 1) contains menu selections that allow you
to configure the attachment of an FDDI Switch Module to the Flexible Network
Buses on the chassis' backplane, and to display an illustration that shows the
topology of the FNB's FDDI rings connected to that module.
In earlier versions of SmartSwitch 9000 Module Local Management, the FNB
NOTE
Configuration selection appeared at the bottom of the General Configuration
Screen (as depicted in the SmartSwitch 9000 Module Local Management User's
Guide). However, in recent versions of SmartSwitch 9000 Module Local
Management, the FNB Configuration selection appears on the Module
Module Name: 9F426-02
Slot Number: 10
Use the arrow keys to highlight an option, and press the Return key. The selected
screen appears.
2
SMARTSWITCH 9000
FNB Configuration Menu
FNB RESOURCE CONFIGURATION
RING MAP CONFIGURATION
Figure 1. FNB Configuration Menu (9F426-02 FDDI Switch Module)
LOCAL MANAGEMENT
Firmware Revision: 01.00.24
BOOTPROM Revision: 00.00.04
RETURN