Cabletron Systems SmartSwitch 9000 Appendix page 16

9X4XX Series Local Management
Slot Configuration Screen Fields
The following information briefly explains each Slot Configuration screen field:
SLOT # (Read-only)
This field displays the slot number of the chassis where the module is located.
MODULE Name (Read-only)
This field displays the name of the SmartSwitch 9000 module.
Module IP Address (Modifiable)
This field allows a user to assign an IP address to an individual module. After a
user assigns a Module IP Address, the field becomes read-only.
Subnet Mask (Modifiable)
This field allows a user to assign a Subnet mask to an individual module. After a
user assigns a Subnet Mask, this field becomes read-only.
Saving Modifications
To save your modifications of the values on the Slot Configuration Screen:
1. Use the arrow keys to highlight SAVE at the bottom of the screen, then press
the Return key.
2. When the message "SAVED OK" displays, the edits you have made are saved.
If you exit without saving, the message "NOT SAVED -- PRESS SAVE TO
KEEP CHANGES" displays. If you exit without saving, your edits will be lost.
Exiting the Slot Configuration Screen
To exit the Slot Configuration Screen, use the arrow keys to highlight RETURN,
and then press the Return key.
14