Download Print this page

Philips HDRW720/69 Operating Instructions Manual page 76

G-code dvd recorder/hard disc
Hide thumbs Also See for HDRW720/69:

Advertisement

These symbols can light up on your DVD recorder display:
Multi-function display/text line
•) Clock
•) Disc/title playing time
•) Title name
•) Display of the programme number of the TV channel/playing
time/channel name/function.
•) Display of information and alerts
•) Display of the title from the actual recording.
IIIIIIIIIIIIIII
Position/Diskbar: Displays the current position on the
HDD/disc.
Time Shift Buffer Displays the elapsed time. If all segments lits, the
oldest recording will be deleted from the Time Shift Buffer.
Play/Record: No segment will lit at the current position.
Pause: Flashing segment at the current position.
Stop: Nothing appears.
TIMER
A recording (timer) has been programmed
o(((
A remote control signal has been received
LANG II
During playback a 2-channel tone was detected or a
2-channel tone was received. 'I' or 'II' lights up depending on which
sound channel has been selected
The following messages may appear in your DVD recorder display
The DVD recorder is in initial installation mode. Switch
the TV on, then read the paragraph on 'Initial installation' in
'Installing your DVD recorder'.
No input signal available (signal inadequate or unstable)
The menu on the screen is active
Disc tray opening
Disc tray open
Disc tray closing
Disc being read
Once recording has been successfully completed the
table of contents is created.
The menu structure is created after the first recording
has been made on a new disc
You received a copy-protected signal. This may come
from a copy-protected DVD/videotape of a DVD/video player or
from a TV channel.
During the display
running recording will be interrupted.
Please wait until this message disappears. The DVD recorder is
busy performing a task.
A disc has not been inserted for recording. If a disc has been
inserted, it cannot be read.
Information about the inserted DVD is displayed on the screen
The DVD recorder is processing the changes to make the disc
DVD compatible
The entire DVD+RW is being erased
The DVD+RW/+R inserted is either new or has been
completely erased (no recordings).
The DVD+RW/+R inserted is protected against recording.
How to remove this protection you will read in the section
'Protect disc against accidental recordings' in the chapter
'Recording on a DVD+RW/+R' .
The maximum number of titles per disc/HDD has been
reached. The maximum number of titles on a disc is 48 and on the
HDD 499.
no recording will be made. A

Advertisement

loading