Philips HDRW720/69 Operating Instructions Manual page 39

G-code dvd recorder/hard disc

Hide thumbs Also See for HDRW720/69:

8 Enter the programme number of the TV channel using the number

buttons 0..9

EXT1 TO TV-I/O

9 Confirm with OK .

0 To end, press TIMER s .

A To find out how you can go back and change the data, read the

section on 'How to change or delete a programmed recording

(TIMER)'

If any of the TIMER blocks are in use, '

recorder display.

EXT2 AUX-I/O

' will light up on the

•) Switch on the TV set, and if necessary, select the programme number for the

DVD recorder.

•) Switch on the DVD recorder.

1 Press TIMER s on the remote control while the DVD recorder

is switched on.

The '

' screen will appear.

2 Use B or A to select the programmed recording you want to

change or delete.

Depending on the programming method (with/without G-Code

system), it is not possible to carry out certain changes using the

function buttons. Therefore, always check the function of the

corresponding button (description in the colour field) before

pressing the button.

3 To end, press TIMER s .

B A D C