Philips HDRW 720/00-02 Quick Install Manual
Philips HDRW 720/00-02 Quick Install Manual

Philips HDRW 720/00-02 Quick Install Manual

Hide thumbs Also See for HDRW 720/00-02:

Advertisement

Quick Links

Features
The HDRW 720 is a DVD recorder that can store TV-shows on a built-in hard disk (HDD).
Moreover, it is a DVD player that can play back DVDs, audio and (s-)video CDs, and MP3 CDs. You can play back and edit the stored TV shows
(or camcorder recordings), and save (archive) these on DVD+RW/+R media for later viewing.
But your HDRW 720 is more than just an ordinary DVD recorder with a built-in hard disk.
From now on, it's better to use your TV set just as a monitor and tune to the various TV channels from your DVD recorder, taking advantage of
features like FlexTime, Instant Replay, or the abitity to pause live TV.
FlexTime:
With FlexTime, you can watch or rewind a TV show while it is being recorded.
You don't have to wait until the end of the recording before starting playback.
Instant Replay:
You can repeat a scene of a live TV show at the touch of a button ( JUMP BACK ), as often as you like.
Pause Live TV
You can pause a live TV show by pressing PAUSE 9 to, say, answer a phone call, while the recording continues. By pressing PLAY G , you
can resume playback of the show at the scene it was interrupted.
Time Shift Buffer
The above features are available because the HDRW 720 uses a so-called Time Shift Buffer.
As soon as you turn on your DVD recorder, it starts recording from the current TV channel into the
Time Shift Buffer. The DVD recorder stores all the TV shows you watched since you turned on the
recorder. If you watched a TV show for more than 60 seconds, the recorder will insert a marker. If
information is already available from the GUIDE Plus+
mark the beginning of the TV show.
Note:When you are recording from a cable box through the external input jacks, the title and start/end
information will not be available.
If the Time Shift Buffer is full (the default setting is 3 hours) the recorder will delete the oldest
recording to make room for new recordings. You can mark TV shows or parts of these to be recorded permanently on the HDD while the other
contents of the Time Shift Buffer will be deleted.
The Time Shift Buffer can be best compared to a conveyor belt running from right to left. A TV show resembles a package on this conveyor belt. If
you change the programme number or the GUIDE Plus+
belt. You can adjust the time a package will remain on the conveyor belt from 1 to 6 hours (the default setting is 3 hours).
As long as the packages are still on the conveyor belt, you can mark them red ( REC/OTR n ) or remove the marker ( RED function button).
You can only mark the package that's directly in front of you.
At the end of the conveyor belt (the preset time has expired), the recorder will decide whether a package will be stored (marked red) or
destroyed (unmarked). Only the packages that are marked red will be stored.
If you delete the Time Shift Buffer, the recorder will immediately remove all packages from the belt, storing only those you marked red.
Welcome to the growing family of owners of PHILIPS equipment.
Thank you for buying a HDRW 720/00-02. The following pages contain
explanations of the main features that will help you better understand
how the HDRW 720/00-02 works.
You will find step-by-step descriptions of each function in the respective
chapter of the User manual.
®
system, the recorder will store the title and
®
system detects the start of a TV show, a new package will be placed on the conveyor
Quick install guide
1

Advertisement

Table of Contents
loading

Summary of Contents for Philips HDRW 720/00-02

  • Page 1 Quick install guide Welcome to the growing family of owners of PHILIPS equipment. Thank you for buying a HDRW 720/00-02. The following pages contain explanations of the main features that will help you better understand how the HDRW 720/00-02 works.
  • Page 2: Quick Install Guide

    Quick install guide Simultaneous recording and playback Thanks to the built-in HDD and the high data rates it can achieve, you can record and play back at the same time. This enables you to: • watch, pause, or rewind a TV show while it is being recorded (FlexTime, Pause live TV) •...
  • Page 3: Programming A Recording

    Quick install guide Navigation in the Time Shift Buffer You can move to any position within the Time Shift Buffer and watch the recording that was stored at that time.The indicator (yellow rectangle on the time bar) shows the playback position in the Time Shift Buffer. You can move this indicator using the C , D buttons. If the playback position is as far on the right-hand side as it can get, you are watching the current (live) picture of the TV channel you are tuned in.
  • Page 4: Recording Mode

    1) Read the items in the User Manual in the section 'Before you call an engineer' 2) Visit the Internet site http://www.philips.com/support to get some online help, 3) Call the customer support service. You will find the telephone numbers at the back of the User manual.
  • Page 5: Connecting To The Tv

    1 Switch off your TV set. 1 Press STANDBY-ON m on the front of the DVD-recorder 'PHILIPS' and then 'IS TV ON?' will appear on the display. 2 Remove the aerial cable plug from your TV set. Insert it into the 2 If necessary, select the programme number for the input socket at ANTENNA IN socket at the back of the DVD recorder.
  • Page 6 Quick install guide 7 Press GUIDE/TV . 1 Switch the DVD-recorder to the TV channel which transmits the GUIDE Plus+ ® data (see table). Setup Home Press Aor Bto select. Then press OK to confirm. TV channel at the external receiver Setup - Tune the external receiver (Set top box, cable box,...) to the right TV Choose item to set up :...
  • Page 7: Guide Plus

    Quick install guide Programming recordings with the Recording on the HDD ® GUIDE Plus+ System 1 Press GUIDE/TV on the remote control. As soon as you turn on the DVD recorder, the currently selected TV channel on the DVD-Recorder is recorded in a temporary storage (Time shift Buffer).
  • Page 8: Manual Recordings

    Quick install guide Buttons in the 'Time Shift Buffer' Manual recordings 1 Press INFO to display the bar of the time shift buffer on the When you switch on the DVD recorder, the currently selected TV screen. programme will be recorded will be recorded in the Time Shift Buffer. 2 The following buttons are available: In order to store a recording on the HDD, you must mark it red in the N , O , PLAY G , PAUSE 9 , D , C , JUMP...
  • Page 9: Recording From A Camera Connected To The Front Sockets

    Quick install guide Starting a recording without data from the Ending a recording manually(immediately) GUIDE Plus+ system: 1 If necessary, switch the TV set to the programme number (input ® socket) of the DVD recorder. If no data is available from the GUIDE Plus+ ®...
  • Page 10: Playback From The Hdd

    Quick install guide Playback from the HDD Archiving (storing) titles on a DVD+RW/+R Each recording stored on the HDD is displayed in the media browser with a corresponding index picture. You can choose the title of the HDD that you want to transfer on a 1 Press BROWSER HDD on the remote control or HDD on the DVD+RW/+R.
  • Page 11: Symbols In The 'Media Browser'

    Quick install guide Symbols in the 'Media Browser' Buttons in the 'Media Browser' If you call up the Media Browser with the BROWSER HDD button, Delete title: following symbols can appear in the infobar at the top of the screen: red function button The tiltle (recordings) will be erased from the HDD.
  • Page 12: The Remote Control

    Quick install guide The remote control REC/OTR n Record the current TV show on the HDD, mark recordings in the time shift buffer to be stored on HDD. Hold button down to start the recording from now. (Mark the recording from the beginning of the actual position in the Time Shift Buffer).
  • Page 13 Quick install guide A B Cursor buttons up, down in the menus. Previous or next position in the time shift buffer during playback from HDD. D C Cursor buttons left, right in the menus. Previous or next position during playback of a title from the HDD (media browser or time shift buffer).
  • Page 14: Colour Buttons

    CHANNEL q To select a higher programme number CHANNEL r To select a lower programme number Additional TV functions for Philips TV-sets if supported from the TV. You need to hold down the • TV button (on the left side).
  • Page 15 Quick install guide Name On /Off Source Programme N. GUIDE Plus+ Table ® Please enter here the data of the TV channels in the GUIDE Plus+ ® System. This can be helpful if you have to install the GUIDE Plus+ ®...
  • Page 16 Name On /Off Source Programme N. Name On /Off Source Programme N.

Table of Contents