Philips HDRW720/69 Operating Instructions Manual page 34

When you switch on the DVD recorder, the currently selected TV
programme will be recorded in the Time Shift Buffer.
In order to store a recording on the HDD, you must mark it red in the
Time Shift Buffer (time bar) before the Time Shift Buffer is deleted.
1 In case the time bar of the Time Shift Buffer is not visible on the
screen, press INFO on the remote control.
2 Press REC/OTR n .
P
The red light around the record button n on the front will
switch on.
P
' ' will appear on the screen on the right end
of the time bar. This indicates that the recording will
automatically end after 30 minutes. Press
REC/OTR n several times to prolong the switch-off time.
REC/OTR n
You can also start a recording immediately, regardless of the
recordings in the Time Shift Buffer.
1 Hold down REC/OTR n until the red light on the record button
n at the front switches on.
STANDBY m
SYSTEM MENU
D C
C D
1 If necessary, switch the TV set to the programme number (input
socket) of the DVD recorder.
2 Press STOP h
P
A message appears on the screen, asking whether you really
want to end the recording.
If you want to end the recording, select '
confirm with OK .
If you do not want to end the recording, confirm '
OK .
STOP h
INFO
3 To permanently store the recording on the hard disk, you have to
erase the Time Shift Buffer. The following options are available:
the preset Time Shift Buffer period expires (the default setting
is 3 hours)
the Time Shift Buffer is manually erased ('
'function( SYSTEM MENU button, '
you turn off the DVD recorder with STANDBY m
you switch to camera mode using CAM (switch back with the
same function button).
' with D and
' using
D
'menu ))