Philips HDRW720/69 Operating Instructions Manual page 28

B To end, press SYSTEM MENU .
For the basic setting of DVD playback, you can select the language for
the subtitles and the audio language.
Please note that with some DVDs the audio language and/or subtitle
language can be changed only via the DVD menu.
For bilingual shows, you can also select the sound channel of the TV
station via the internal tuner ( TUNER button) for recording or
playback.
•) The TV set is switched on, and if necessary, the programme number for the
DVD recorder has been selected.
•) the DVD recorder is switched on.
1 Press the BROWSER HDD button and then the SYSTEM
MENU button on the remote control.
P
The menu bar appears.
2 Select '
' symbol with D or C .
3 Select '
' with B or A and confirm with the C button.
4 Select the appropriate line and confirm with C .
The DVD will play back in the language you have chosen.
Subtitle language
You have the option of setting one of the displayed languages
for the on-screen menu (OSD). However, the DVD recorder
display will only display English text regardless of this setting.
5 Select the appropriate setting using B or A and confirm with
OK .
6 To end, press SYSTEM MENU .
If the display shows an incorrect time or '
be reset manually.
1 Press the BROWSER HDD button and then the SYSTEM
MENU button on the remote control.
P
The 'SYSTEM MENU' appears.
2 Select '
' using B .
3 Press C to select '
4 Select the line '
P
A message appears on the screen that the change of this
setting will flush the 'Time Shift Buffer'.
If the 'Time Shift Buffer ' contains important recordings, save
them with the REC/OTR n button first. Read additional
information to the 'Time Shift Buffer' in the chapter 'The Time
Shift Buffer'.
5 Select '
' with D and confirm with OK .
If the message window was closed, confirm the line with
C again.
6 Select '
' using B or A and confirm with C .
7 Change the time in '
remote control.
8 Check '
', ' ' and '
entry field with the B or A button.
', the time and date must
'.
' using B and confirm with C .
' using the number buttons 0..9 on your
' in the same way. Select the