Philips HDRW720/69 Operating Instructions Manual page 23

To copy camcorder recordings, you can use the front sockets. These
sockets are located behind the flap on the right hand side.
Recordings from the front sockets were stored on the HDD to make
editing easy. Then you can transfer (archive) them on a DVD+RW/+R.
If you have a DV or Digital 8 camcorder, connect the DV IN
(CAM2) input of the DVD recorder to the appropriate DV output on
the camcorder.
Choose ' ' as a programme number for this input.
If you have a Hi8 or S-VHS(C) camcorder, connect the S-VIDEO
(CAM1) input of the DVD recorder to the appropriate S-VHS output
on the camcorder.
You must also connect the audio input L AUDIO R (CAM1) on the
DVD recorder to the audio output on the camcorder.
Choose ' ' as a programme number for this input.
If you have a camcorder that only has a single video output (Composite
Video, CVBS), connect the VIDEO (CAM1) input on the DVD
recorder to the appropriate output on the camcorder.
You must also connect the audio input L AUDIO R (CAM1) on the
DVD recorder to the audio output on the camcorder.
Choose ' ' as a programme number for this input.
Two analogue audio sockets AUDIO OUT L/R (audio signal output
left/right) are located at the back of the DVD recorder.
These can be used to connect the following:
At the back of the DVD recorder there are two digital audio output
sockets OPTICAL OUT for an optical cable and COAX OUT for a
coaxial cable (Cinch cable).
These can be used to connect the following:
a
b