Download Print this page

Philips HDRW720/69 Operating Instructions Manual page 73

G-code dvd recorder/hard disc
Hide thumbs Also See for HDRW720/69:

Advertisement

Films on pre-recorded DVD discs may contain scenes not suitable for
children. Therefore, some discs may contain 'Parental Control' rating
information that applies to the entire disc or to certain scenes on the
disc.
The appropriate scenes have filter values that reach from 1-8. If such a
scene is detected during playback, the filter value set on the DVD
recorder is compared to the scene. If the filter value is higher than the
setting, an alternative scene will be played (if available).
Most DVDs apply the rating to an entire DVD. Therefore, if certain
scenes exceed the rating you select, the entire disc will be blocked
from viewing.
•) Switch on the TV set, and if necessary, select the programme number for the
DVD recorder.
•) Switch on the DVD recorder.
1 Press DISC MENU and then SYSTEM MENU on the remote
control.
P
The menubar appears.
2 Select the '
' icon using D or C .
3 Press the SYSTEM MENU button on the remote control.
4 Select the '
' icon using D or C .
5 Select '
(
6 Confirm '
7 Enter a 4-digit code of your choice. If the code is new, you may
have to enter the code a second time as confirmation.
8 Select the '
A bar appears to select the parental level.
9 Select the appropriate rating using B , A or the number buttons
0..9 .
)' using B or A and confirm with C .
' using C .
' using A or B and confirm with C .
0 Confirm with OK . Quit using D and SYSTEM MENU .
The set filter values depend on the respective country. It is therefore
necessary to enter the country to which these filter values apply.
•) Switch on the TV set, and if necessary, select the programme number for the
DVD recorder.
•) Switch on the DVD recorder.
1 Press the DISC MENU and then the SYSTEM MENU button
on the remote control.
P
The menubar appears on the screen.
2 Select the '
' icon using D or C .
3 Select line '
(
C .
4 Confirm the line '
5 Enter your four-digit code. If the code is new, you may have to
enter the code a second time as confirmation.
6 Select '
7 Select the corresponding country using A or B and confirm
with OK .
8 To end, press D and then SYSTEM MENU .
)' using B or A and confirm with
' using C .
' using B or A and confirm with C .

Advertisement

loading