System Menu - Philips HDRW720/69 Operating Instructions Manual

Using this feature you can select where playback should start (select
elapsed time).
1 During playback press SYSTEM MENU on the remote control.
P
The menu bar will appear at the top of the screen.
2 Select the '
' symbol using C or D and confirm with B .
P
Playback is stopped and a box appears on the screen showing
the elapsed time.
3 Enter the start time with the digit keys 0..9 from where playback
should start.
4 Confirm with OK .
a
b
5 Playback starts at the time you entered.
You can mark entire sections or the whole disc for endless playback.
Depending on the type of disc (DVD video, DVD+RW, video CD) you
can select a chapter, title or the entire disc.
1 Select the desired chapter, title or the entire disc and start
playback.
2 During playback, press SELECT . By pressing SELECT again
you can chose from the following options:
•) ' ': repeat chapter (DVD only)
•) ' ': repeat track/title
•) ' ': repeat entire disc (Video CD, Audio CD only)
•) ' ': Shuffle
•) Display disappears: no repeat
3 To end the repeat, press the STOP h button.
You can also keep pressing the SELECT button until the
displays disappear.
You can repeat a particular passage within a title/chapter. You need to
indicate the start and end of the passage.
1 During playback press PAUSE 9 at the start point.
P
You will see a still picture.
2 Keep pressing SELECT until '
P
The start point is now saved.
3
Press PLAY G to start playback.

SYSTEM MENU

' appears on the screen.
4 When the end point is reached press OK .
P
' ' appears on the TV screen.
Playback now takes place within these points.
5 To end the repeat, press the STOP h button.
You can also keep pressing the SELECT button until the
displays disappear.
This feature plays back the first 10 seconds of each chapter (DVD) or
track (CD).
1 During playback, press SELECT . Select '
SELECT .
P
After 10 seconds the DVD recorder switches to the next
chapter/index.
To start playback at the relevant chapter/index press
STOP h and then PLAY G .
If a DVD contains scenes that have been shot from different camera
angles you can select these camera angles for playback.
1 During playback, press PAUSE 9 .
P
You will see a still picture.
2 Press SYSTEM MENU and select the '
a
b
3 Select the required camera angle with B or A .
You can also directly enter the number with the number
buttons 0..9 .
P
After a short time, playback will resume from the new camera
angle.
The ' ' symbol will remain visible until a scene starts for
which there is only one camera angle.
' using
' icon using C .