Advertisement
Available languages
Available languages
You can connect additional devices such as decoders, satellite
receivers, camcorders, etc. to the EXT2 AUX-I/O socket.
When playback is started on this additional device the DVD recorder
automatically connects the EXT2 AUX-I/O scart socket with the
EXT1 TO TV-I/O scart socket. You will then see the picture from the
additional device on your TV set, even if the DVD recorder is switched
off.
The TV/DVD button on the remote control allows you to
switch between playback through the EXT2 AUX-I/O scart
socket and playback from the DVD recorder.
MONITOR
You can also connect a video recorder or a DVD player to the EXT2
AUX-I/O input socket.
The DVD recorder must be connected
TO TV-I/O socket directly to the TV set). If there is a video recorder
in between the picture quality may be poor because of the copy
protection system built into the DVD recorder.
If you already have an external receiver (satellite receiver,
set-top box, cable TV box) connected to this socket, you can
connect the video recorder to the 'VCR', 'TO VCR', ...socket
of the external receiver.
You can also use the front sockets S-VIDEO (CAM1) ,
VIDEO (CAM1) and the AUDIO L/R (CAM1) audio
sockets.
EXT2 AUX-I/O
0
CHANNEL r
to the TV set ( EXT1
1 Connect the
set-top box, cable TV box,...) provided for the TV set (usually
labelled 'TV', 'TO TV',...) with the EXT2 AUX-I/O socket of the
DVD recorder.
If your external receiver offers several options for the signal
available at the 'TV', 'TO TV',... socket, choose the 'RGB'
setting.
EXT1 TO TV-I/O
TV-I/O
VIDEO OUT
(CAM1)
of the receiver (satellite receiver,
EXT1 TO
COMPONENT
VIDEO (CAM1) S-VIDEO
AUDIO L/R (CAM1)
Advertisement
