Advertisement
Available languages
Available languages
SELECT
EXT1 TO TV-I/O
SELECT
SELECT
SELECT
5 If all information is correct, press the OK button.
P
The programming information is stored in a TIMER block.
6 To end, press TIMER s .
P
The disc you have inserted will be checked.
7 Search the position on the disc where the recording should begin.
8 Switch off with STANDBY m .
The programmed recording will only function properly if the DVD
recorder has been
If any of the TIMER blocks are in use, '
recorder display.
EXT2 AUX-I/O
TIMER s
C
using the STANDBY m button.
' will light up on the
•) Switch on the TV set, and if necessary, select the programme
number for the DVD recorder.
•) Switch on the DVD recorder.
1 Press TIMER s on the remote control.
P
The programming mode selected last is marked.
2 Select '
' using B or A and confirm with C .
3 Select the programmed recording (TIMER) you want to check,
change or delete with B or A .
CLEAR
OK
4 Press C .
Select the input field with D or C .
If required, change the information with A , B or the number
buttons 0..9 .
5 Confirm with OK .
6 To end, press TIMER s .
7 Switch off with STANDBY m .
This DVD recorder is equipped with the 'NexTView Link' feature. If
your television is also equipped with 'NexTView', you can mark TV
programmes on the television for programming. These TV programmes
will automatically be transmitted to a TIMER block on the DVD
recorder.
If you clear the marking of the TV programme on the television, the
corresponding TIMER block on the DVD recorder will also be cleared.
For more information, read the instruction manual of your TV set.
Advertisement
