Advertisement
Available languages
Available languages
PROBLEM
SOLUTION
1
Enter the ShowView programming number of the TV channel you want.
2
Confirm with OK .
3
Check the programme number in the '
4
If this does not correspond to the desired TV channel, select the input field and change the
programme number/channel name.
b
b
b
b
b
b
b
b
b
b
Open the disc tray with OPEN/CLOSE J . Insert the disc but do not close the tray.
1
2
Hold down the number button 2 on the remote control until the tray closes. The disc is
modified.
3
You can restore the disc to its original condition by pressing 1 .
There is a risk that you can no longer play the disc on other DVD players after this procedure.
Therefore, apply this function with particular care.
b
1
Clean the disc
Open the disc tray with OPEN/CLOSE J . Insert the disc but do not close the tray.
2
3
Hold down CLEAR on the remote control until the tray closes. The disc is prepared for
erasing.
4
Start recording as with an empty disc.
' input field.
Advertisement
