PROBLEM
If you have any problems using this DVD recorder, the reason may be one of the following. You can
also call the
The telephone numbers can be found on the back of this instruction manual.
You can also visit our
Have the model number (MODEL NO) and the production number (PROD.NO) of your recorder
ready.
The production number (PROD. NO.) is printed on the type plate at the back or on the bottom
SOLUTION
b
b
1
Pull out the mains plug from the wall outlet.
Press and hold down h and OPEN/CLOSE J and put back the mains plug into the wall
2
outlet.
As soon as the time or '--:--' appears in the display (ca. 6 - 10 seconds), release h and
3
OPEN/CLOSE J .
b
b
STANDBY m
b
b
1
Disconnect from the mains power supply.
2
Press and hold down the STANDBY-ON m button on the device and reconnect to the
mains power supply.
Release the STANDBY-ON m button when the features appears on the display. All the
3
information stored (TV channels, time and date, TIMER) will be lost.
Please read paragraph 'Initial Installation' in the chapter 'Installing your DVD Recorder'.
b
b
b
b
b
b
b
b
in your country.
EXT2 AUX-I/O
STANDBY m
.
EXT2 AUX-I/O