Advertisement
Available languages
Available languages
a
b
0..9
OK
a
b
SYSTEM MENU
b
a
b
P
The decoded data appears after confirmation. You can go back
and change the data. Select the appropriate input field with
C or D . If required, make changes using A , B or the
number buttons 0..9 .
REC MODE
C D
C
SELECT
SELECT
C
6 If all information is correct, press the OK button. The
programming information is stored in a TIMER block.
7 To end, press TIMER s .
8 Insert a recordable disc (one without write protection).
The inserted disk is checked.
9 Search the position on the disc where the recording should begin.
Press STOP h .
0 Switch off the DVD recorder using STANDBY m .
The programmed recording functions only if the DVD recorder
using STANDBY m .
has been
If one or more recordings have been programmed '
on the display.
•) Switch on the TV set, and if necessary, select the programme
number for the DVD recorder.
•) Switch on the DVD recorder.
1 Press TIMER s on the remote control.
P
The programming method selected last is marked.
2 Select line '
with the C button.
P
The information will appear on the screen.
3 Select the input field with D or C .
4 Enter information with B or A or with the number buttons
0..9 .
' will light up
' with B or A . and confirm
Advertisement
