Advertisement
Available languages
Available languages
Use this connection method if your TV set is equipped with 'Easy Link,
Cinema Link, NexTView Link, Q-Link, Smart Link, Megalogic, Datalogic,
...'.
Please see your TV's operating instructions.
1 Switch off your TV set.
2 Plug in a full-pin scart cable (all 21 contacts wired) into the scart
socket EXT1 TO TV-I/O at the back of the DVD recorder and
the corresponding scart socket - suitable for Easylink - at the back
of the TV set (see TV set operating instructions).
Read the next chapter 'Connecting additional devices' on how
to connect additional devices (satellite receivers,
videorecorders,...) to the input-/output sockets.
3 Switch on the TV set.
4 Use the supplied mains cable to connect the mains socket
4MAINS at the back of the DVD recorder with the wall outlet.
P
The most important features of the DVD recorder will appear
in scrolling text on the display.
After the first installation is completed this function will be
switched off. How you switch on this function again, read in
the chapter 'User preferences' in the section 'standby'.
5 Switch on the DVD recorder using STANDBY-ON m .
P
A message appears on the screen announcing that the transfer
has started.
P
'
' appears on the display during transfer.
P
The TV set transfers all saved TV channels, in the same order,
to the DVD recorder
This may take several minutes.
If more installation menus appears on your TV set
- select the line with B , A .
- confirm with C
- change the data with B , A or the number buttons 0..9
- confirm with OK .
For more information on the various functions see 'Initial
installation' in 'Installing your DVD recorder'.
Initial installation is now complete.
Advertisement
