Advertisement
Available languages
Available languages
These symbols can light up on your DVD recorder display:
Multi-function display/text line
•) Clock
•) Disc/title playing time
•) OTR switch-off time
•) Title name
•) Display of the programme number of the TV channel/playing
time/channel name/function.
•) Display of information and alerts
IIIIIIIIIIIIIII
Disc bar : Displays the current position on the disc (disc
pointer).
Play/Record: Single flashing segment at the current position.
Pause: Flashing segment on both sides of the current position.
Stop: Illuminated segment at the current position.
SAT
An automatic recording from a satellite receiver (SAT
recording) has been programmed.
TIMER
A recording (timer) has been programmed
Die Anzeige blinkt, wenn eine programmierte Aufnahme nicht
durchgeführt werden kann. Der DVD-Recorder ist entweder
eingeschaltet, oder es ist eine gesperrte DVD+RW/+R eingelegt.
PRO
Component Video output switched to 'progressive scan'. If this
display does not appear, the Component Video output is switched
to 'interlaced'.
o(((
A remote control signal has been received
VPS/PDC
Video programming system / programme delivery control:
A VPS or PDC code is transmitted for the selected TV program
LANG II
During playback a 2-channel tone was detected or a
2-channel tone was received. 'I' or 'II' lights up depending on which
sound channel has been selected
The following messages may appear in your DVD recorder display
The DVD recorder is in initial installation mode. Switch
the TV on, then read the paragraph on 'Initial installation' in
'Installing your DVD recorder'.
No input signal available (signal inadequate or unstable)
The menu on the screen is active
Disc tray opening
Disc tray open
Disc tray closing
Disc being read
Once recording has been successfully completed on a
DVD+RW/+R the table of contents is created.
The menu structure is created after the first recording has
been made on a new disc
You received a copy-protected signal. This may come
from a copy-protected DVD/videotape of a DVD/video player or
from a TV channel.
During the display
running recording will be interrupted.
Please wait until this message disappears. The DVD recorder is
busy performing a task.
A disc has not been inserted for recording. If a disc has been
inserted, it cannot be read.
Information about the inserted DVD is displayed on the screen
The DVD recorder is processing the changes to make the disc
DVD compatible
The entire DVD+RW is being erased
The DVD+RW/+R inserted is either new or has been
completely erased (no recordings).
The DVD+RW/+R inserted is protected against recording.
The maximum number of titles per disc has been reached.
The maximum number of titles on a disc is 48.
The maximum number of chapters within a title/or the disc
has been reached. The maximum number of chapters within a title
is 99, on a disc 255. (spreaded over the whole disc).
The disc is full. There is no space for new recordings
A disc with PAL recordings has been inserted. The machine
is trying to record an NTSC signal. Insert a new disc or one that
contains NTSC recordings.
no recording will be made. A
Advertisement
