Panasonic AW-RP501 Operating Instructions Manual page 34

Hybrid control panel

Hide thumbs Also See for AW-RP501:

Table of Contents

Enlarged version

6. Camera and Pan/tilt Head Presetting

q Pick up a desired object with the camera using

PAN/TILT Lever #8 ZOOM Lever #6 and FOCUS Lever

Select a white balance control mode using

AUTO/ATW ATW Switch i AUTO/ATW A Switch o or

AUTO/ATW B Switch !0 . To store iris data in the mem-

ory, set IRIS AUTO/MANU Switch @5 to the MANU posi-

tion and turn the iris control. When IRIS AUTO/MANU

Switch @5 is in the AUTO position, iris data will not be

stored in the memory.

w Keep MEMORY Switch @7 depressed (MEMORY Switch

@7 lights and all the 10 buttons of PRESET Switches @8

flash), press any of the buttons [1] to [10] of PRESET

Switches @8 as desired to store the data in the memory.

Only that button of PRESET Switches @8 where the data

is stored lights.

Note: If data is stored again in the same button of PRE-

SET Switches @8 the preceding data is deleted.

7. Various Switch Settings

Set the gain, shutter and other switches as appropriate to

the conditions of using the camera.

8. Camera and Pan/tilt Head Operation

Control the camera and pan/tilt head using PRESET

Switches @8 PAN/TILT Lever #8 ZOOM Lever #6 FOCUS

Lever #7 IRIS AUTO/MANU Switch @5 and other switches.

* In case of not changing the adjustment data and set-

tings, it is not necessary to repeat the adjustment and

setting procedures described in Sections 2 to 7.

-32-

Table of Contents