Panasonic AW-RP501 Operating Instructions Manual page 31

Subcarrier Phase Adjustment
q Set G/L PHASE ON/OFF Switch !5 to the ON position.
Note: When G/L PHASE ON/OFF Switch !5 is set to the
ON position, the sync phase of the camera
changes to the settings of G/L PHASE H Control
!8 , G/L PHASE Coarse Switch !6 , and G/L PHASE
SC Control !7 . Unless G/L phase adjustment is
necessary, do not set G/L PHASE ON/OFF Switch
!5 to the ON position.
w Adjust G/L PHASE Coarse Switch !6 and G/L PHASE
SC Control !7 to match the subcarrier color phase of
the video signal output with that of the reference tone,
such as of the program output (split color bar output) of
a Color Special Effect Generator, for example. Higher
accuracy can be obtained if a vectorscope is used for
color phase adjustment.
e Set G/L PHASE ON/OFF Switch !5 back to the OFF
position.
G/L PHASE ON/OFF Switch !5
G/L PHASE Coarse Switch !6
G/L PHASE SC Control !7
G / L P H A S E
9 0 ° 1 8 0 °
O N S C
0 ° 2 7 0 °
O F F
-29-
H
Color bar of
camera
Split line
Color bar of
special Effects
generator