Panasonic AW-RP501 Operating Instructions Manual page 13

#8 Pan/tilt Lever [PAN/TILT, UP/DOWN/LEFT/RIGHT]
Controls the head's pan/tilt operation at varying
speed depending on the angle of the lever. The
pan/tilt head turns up when the lever is moved
toward UP, or down when it is moved toward DOWN,
provided that TILT REVERSE Switch %4 is in the NOR
position. The pan/tilt head moves in the opposite
direction if the TILT REVERSE Switch %4 is in the REV
position. The pan/tilt head turns leftward when the
lever is moved toward LEFT, or rightward when it is
moved toward RIGHT, provided that PAN REVERSE
Switch %5 is in the NOR position. The pan/tilt head
moves in the opposite direction if the PAN REVERSE
Switch %5 is in the REV position.
Note: TILT REVERSE Switch %4 and PAN REVERSE
Switch %5 may be used to reverse the operating
direction of the pan/tilt head, but be sure to set
the operating direction of the pan/tilt head with
its mounting direction selection switch during its
installation depending on whether the pan/tilt
head is mounted on the floor or is suspended.
Unless the mounting direction selection switch
on the pan/tilt head is properly set, the pan/tilt
head will pan or tilt in the opposite direction and
the pan/tilt head operation limiters will not be
properly stored in the memory. For details on
the setting of this switch, refer to
OF PAN/TILT HEAD at page 18 or the Operating
Instructions for the Pan/tilt Head.
INSTALLATION
-11-