Panasonic AW-RP501 Operating Instructions Manual page 28

w Right Panning Limiter
Turn the pan/tilt head to the desired right panning limit
with PAN/TILT Lever #8 , keep MEMORY Switch @7
depressed, and simultaneously press buttons [4] and
[9] of PRESET Switches @8 for 5 seconds or more.
When the desired limit has been set, button [5] of PRE-
SET Switches @8 lights.
To reset the limit, keep the MEMORY Switch @7
depressed, and simultaneously press buttons [4] and
[9] of PRESET Switches @8 again for 5 seconds or
more. When the set limit is reset, button [10] of PRE-
SET Switches @8 lights.
e Up Tilting Limiter
Turn the pan/tilt head to the desired up tilting limit with
#8 ,
PAN/TILT Lever keep
depressed, and simultaneously press buttons [2] and
[3] of PRESET Switches @8 for 5 seconds or more.
When the desired limit has been set, button [5] of PRE-
SET Switches @8 lights.
To reset the limit, keep the MEMORY switch @7
depressed, and simultaneously press buttons [2] and
[3] of PRESET Switches @8 again for 5 seconds or
more. When the set limit is reset, button [10] of PRE-
SET Switches @8 lights.
@7
MEMORY Switch
-26-
r Down Tilting Limiter
Turn the pan/tilt head to the desired down tilting limit
with PAN/TILT Lever #8 , keep MEMORY Switch @7
depressed, and simultaneously press buttons [7] and
[8] of PRESET Switches @8 for 5 seconds or more.
When the desired limit has been set, button [5] of PRE-
SET Switches @8 lights.
To reset the limit, keep the MEMORY switch @7
depressed, and simultaneously press buttons [7] and
[8] of PRESET Switches @8 again for 5 seconds or
more. When the set limit is reset, button [10] of PRE-
SET Switches @8 lights.