Panasonic AW-RP501 Operating Instructions Manual page 22

• Shifting Cable Compensation Switch on Pan/tilt
Head
If the distance from the control panel to the pan/tilt head
is longer than 300 meters, set the cable compensation
switch to the ON position by observing the following
procedure.
q Remove the controller connection panel from the
pan/tilt head.
* Be careful of the wires.
w Shift the cable compensation switch on the inner side
of the controller connection panel of the pan/tilt head to
the ON position.
e Place the controller connection panel back on the
pan/tilt head.
Lens Mounting
• Turn the lens lock ring knob fully counterclockwise.
• If the lens mount has a cap, remove the cap.
• With the lens positioning pin up, mount the lens.
• Turn the lens lock ring knob clockwise till the lens is
securely fastened.
ON
OFF
-20-
Lens lock ring knob