Panasonic AW-RP501 Operating Instructions Manual page 16

$7 7 Video Output Connectors
[VIDEO OUT 1, VIDEO OUT 2] (BNC Connector)
Video signals adjusted by the cable compensation cir-
cuit according to the cable length from the rotary head
to the control panel are output. There are two output
connectors to be connected to a monitor, special
effect generator (SEG), VCR, or other video input
devices with coaxial cables.
$8 Genlock Input Connectors
[G/L IN] (BNC Connector)
Black burst signals are input to one of the two connec-
tors in operating the camera in external sync mode.
The two connectors are automatically terminated, so
input the above signals to one of them and use the
other as a loop-through output.
$9 S-Video Output Connector
[S-VIDEO OUT] (4-pin S-Connector)
Y (luminance) and C (chrominance) signals are output.
Connect it to the S-video input on a monitor or S-VHS
VCR, for example.
-14-