Table of Contents
Advertisement
Setup menu
When the board is installed in the VTR, the setup menu
shown below can be used.
USER menu
<VIDEO>
Item
Super-
No.
imposed
display
600
VIDEO
IN
SEL
<Note>
O When SDTI has been selected as the setup menu item
No.600 (VIDEO IN SEL) setting, the selection established
by the menu item No.700 (AUDIO IN SEL) setting is
rendered invalid, and the audio setting is also fixed at the
SDTI input.
The underlining above indicates the factory settings.
Setting
Super-
No.
imposed
display
0000
INT SG
0001
SDI
0002
SDTI
Description of setting
For selecting the (video) signal
which is to be input.
0: The internal signal selected by
VIDEO INT SG is generated.
1: The serial video signal which has
been input to the HD SDI IN
connector is selected.
2: The serial compressed signal
which has been input to the SDTI
IN connector is selected.
17
Advertisement
Table of Contents
