Table of Contents
Advertisement
SDTI input operations
SDTI input connector
This connector is used exclusively for SDTI input signals.
To select SDTI as the input
Select SDTI as the menu item No.600 (VIDEO IN SEL)
setting.
To select the time code
To select the time code of the SDTI input signal, set the
TC INT/EXT switch to EXT, and select SLTC or SVITC as
the menu item No.507 (EXT TC SEL) setting.
<Notes>
O When SDTI has been selected as the input signal, the
SDTI signal is selected for both the audio and video
signals.
O No adjustments can be performed for the audio and video
signals in the SDTI input signals.
O Only SDTI signals in the DVCPRO HD (100 Mbps) format
selected by menu item No.020 (SYS FORMAT) can be
recorded. However, no guarantees can be made either
for the recordings made when playback signals at a
speed other than the normal (x1) speed are input or for
EE pictures. (The sound is muted.)
11
Advertisement
Table of Contents
