Table of Contents
Advertisement
Precautions for using SDTI
Bear in mind the following precautions when using SDTI.
O It is possible to conduct recording operations for the SDTI
input signals but only for transmission at the x1 speed
and only in the DVCPRO HD (100 Mbps) format which
has been selected as the menu item No.020 (SYS
FORMAT) setting.
O Editing operations involving the SDTI cannot be
performed.
O SDTI dubbing cannot be conducted for tapes recorded in
the DV or DVCAM format.
O Cue signals cannot be transmitted using SDTI. To dub
them, connect a separate cable for use with these
signals. In this case, the selection established by the
menu item No.730 (REC CUE) setting is rendered invalid,
and the setting is fixed at the cue signal input.
O No guarantees are made for the video signal output when
a tape on which SLOW playback signals have been input
by SDTI and recorded is replayed in the SLOW mode.
(The sound is muted.)
15
Advertisement
Table of Contents
