Table of Contents
Advertisement
SDTI output operations
SDTI output connector
This connector is used exclusively for SDTI output signals.
<Notes>
O When playing back a tape in the DVCPRO (25 Mbps),
DVCPRO50 (50 Mbps), DVCPRO P (50 Mbps) or
DVCPRO HD (100 Mbps) format, the signals will be
output in the same format as the one in which the
recording was made on the tape.
O DV compressed signals (see
SDTI output signals when a DV or DVCAM format tape is
played back.
O No adjustments can be performed for the audio and video
signals in the SDTI output signals.
O During SLOW/STILL playback, unprocessed audio and
video signals will be output as the SDTI output signals. If
these audio and video signals are monitored on another
component, they may differ from the audio and video
signals which are played back on the AJ-DH150.
O SDTI signals are not output when the field frequency is
60 Hz.
These signals comply with the IEC6134-2 standard.
21
) will be output as the
21
13
Advertisement
Table of Contents
