Installing The Aj-Yac150P Board - Panasonic AJ-YAD250 Operating Instructions Manual

Installing the AJ-YAC150P board

Consult your dealer before attempting to install the
digital video interface board.
The software versions for the VTR unit need to be
upgraded. Check to see if the proper versions are
running.
AV DV REC Ver.1.07 and up
DV PB
I/F
FRONT
SYSCON
SERVO
This board must be installed in the AJ-HD150 in order for it
to be used. Follow the procedure described below.
1.
Disconnect the power cord from the main unit.
2.
Remove the two coin screws to remove the top panel
from the main unit.
Ver.1.03 and up
Ver.1.04 and up
Ver.1.02 and up
Ver.1.05 and up
Ver.1.03 and up
Coin screws
5