Dell PowerEdge M420 Administrator's Manual page 77

supportShow
Displays switch information for debugging purposes.
Synopsis supportshow [[slotnumber/]portnumber1-portnumber2] [lines]
Description Use this command to display support information from groups of preselected FC SAN Module OS
and Linux commands and other support and debugging information. You can specify the range of
ports for which to display this information. These commands are organized by groups, but note that
the order of the groups listed below is not the same as executed by the command.
SupportShow executes commands in the following command groups. Use supportShowCfgenable
or supportShowCfgDisable to modify the settings for each group.
os
exception
port
fabric
services
security
network
portlog
system
extend
filter
perfmon
ficon
iswitch
asic_db
Dell 8/4Gbps FC SAN Module Administrator's Guide
53-1001345-01
Saving support information for chassis:HL_5100_66, module:RAS...
Saving support information for chassis:HL_5100_66, module:TRACE_OLD...
Saving support information for chassis:HL_5100_66, module:TRACE_NEW...
Saving support information for chassis:HL_5100_66, module:FABRIC...
Saving support information for chassis:HL_5100_66, module:CORE_FFDC...
Saving support information for chassis:HL_5100_66, module:DIAG...
Saving support information for chassis:HL_5100_66, module:RTE...
Saving support information for chassis:HL_5100_66, module:ISCSID_DBG...
Saving support information for chassis:HL_5100_66, module:AGDUMP...
Saving support information for chassis:HL_5100_66, module:SSHOW_PLOG...
Saving support information for chassis:HL_5100_66, module:SSHOW_OS...
Saving support information for chassis:HL_5100_66, module:SSHOW_EX...
Saving support information for chassis:HL_5100_66, module:SSHOW_FABRIC...
Saving support information for chassis:HL_5100_66, module:SSHOW_SERVICE...
Saving support information for chassis:HL_5100_66, module:SSHOW_SEC...
Saving support information for chassis:HL_5100_66, module:SSHOW_NET...
......(output truncated)
OS group commands, enabled by default.
Exception group commands, enabled by default.
Port group commands, enabled by default.
Fabric group commands, enabled by default.
Service group commands, enabled by default.
Security group commands, enabled by default.
Network group commands, enabled by default.
Portlog group commands, enabled by default.
System group commands, enabled by default.
Extend group commands, disabled by default.
Filter group commands, disabled by default.
Performance Monitor group commands, disabled by default.
FICON group commands, disabled by default.
FC Router group commands, disabled by default.
ASIC DB group commands, disabled by default.
B
supportShow
63