Dell PowerEdge M420 Administrator's Manual page 65

To display the license keys on a switch with temporary (expired) licenses installed:
To display the license keys on a switch with universal time-based and slot-based licenses installed
(the first two examples show time-based, the third one shows a slot-based license):
licenseAdd
Adds a license key to a switch.
Synopsis licenseadd license
Description Use this command to add a license key to a switch.
Some features of the switch and the fabric to which it is connected are optional, licensed products.
Without a valid license installed for such products, their services are not available.
A license key is a string of any length consisting of upper- and lowercase letters and numbers.
License keys are case-sensitive. The license must be entered exactly as issued. The system may
accept an incorrectly entered license, but the licensed products will not function. After entering the
license, use the licenseShow command to validate the product associated with the license. If no
licensed products are shown, the license is invalid.
After you enter a license, the licensed product is generally available immediately without requiring
a system reboot. The following exceptions apply:
•
•
Dell 8/4Gbps FC SAN Module Administrator's Guide
53-1001345-01
switch:admin> licenseShow
7QmYFYJrmDgE9tTS4AYXB9trYSGtMtrQZSTK4ZSC7FC9ZAYAgE:
Integrated Routing license
Expiry Date 01/16/2008
License is expired
33YBfZfKZ3tQKrRJJRtgmS3JDtCL99P4fYrJYQP7GffS4ASmNE:
Enterprise Bundle license
Expiry Date 01/16/2008
License is expired
switch:admin> licenseshow
DAmHTPgQ7KDtKrEYQC7X7STF9HJDL7TmTWRmZPmSTSE49AEfaE:
Trunking license
Expiry Date 11/11/2008
License is expired
H47CFSa93aKgKJM9NWMYEMaLrATQWDHCgHfZftWGGgNCYAJaBA:
High-Performance Extension over FCIP/FC license
Expiry Date 12/20/2008
KBrttggRJ4TEBBAt4CrXWRgSCgCJrKZNRFYS9A74ZG:
10 Gigabit Ethernet (FTR_10G) license
Capacity 4
Consumed 2
Configured Blade Slots 1,3.
When adding a fabric license to a switch that lacks a fabric license, you must reboot the switch
to activate the license.
When adding a trunking license is added to the switch, you must refresh the trunk ports to
activate the trunking license. Depending on your system, use portDisable/portEnable,
switchDisable/switchEnable or chassisDisable/chassisEnable to refresh the trunk ports.
B
licenseAdd
51