Dell PowerEdge M420 Administrator's Manual page 56

B
firmwareDownload
Diagnostics The configuration download may fail for one or more of the following reasons:
•
•
•
•
•
•
•
•
•
•
firmwareDownload
Downloads firmware from a remote host, a local directory, or a USB device.
Synopsis To invoke the command in interactive mode:
firmwaredownload
To download FOS firmware over a network:
firmwaredownload [ -s [ -b | -n ] ] [ -p ftp | scp ] [ -c ] [ -o ] host, user, pfile, passwd
To download SAS/SA firmware over a network:
firmwaredownload -a sas | dmm | application [ -t slotnumber(s) ] [ -p ftp | scp ] [ -c ] [ -o ] host,
user, pfile, passwd
To download SAS firmware over a network and remove the existing SA firmware at the same time:
firmwaredownload -a sas [ -t slotnumber(s) ] [ -p ftp | scp ] [ -c ] [ -o ] [ -e ] host, user, pfile, passwd
To download FOS firmware from a USB device:
firmwaredownload [ -s [ -b | -n ] ] [ -U ] [-c] [ -o ] pfile
To download SAS/SA firmware from a USB device:
firmwaredownload -a sas | dmm | application [ -t slotnumber(s) ] [ -U ] [-c] [ -o ] pfile
To download SAS firmware from a USB device and remove the existing SA firmware at the same
time:
firmwaredownload -a sas [ -t slotnumber(s) ] [ -U ] [-c] [ -o ] [ -e ] pfile
Description Use this command to download switch firmware from an FTP or SSH server or local NFS directory to
nonvolatile storage. Switch firmware can also be downloaded from an external USB device on
platforms that support USB.
42
The switch has not been disabled. Disabling the switch is not necessary for configuration files
containing only certain SNMP or Fabric Watch parameters. You may wish to attempt
configDownload first without disabling the switch, and if there is at least one changed
parameter outside of Fabric Watch or SNMP, you are prompted to disable the switch before
proceeding.
The host name is not known to the switch.
The host IP address cannot be contacted.
You do not have permission on the host.
You are running a script that prints something at login.
The file does not exist on the host.
The file is not a switch configuration file.
The FTP server is not running on the host.
The configuration file contains errors.
The configuration file's logical switch definitions do not match the definitions on the target
switch.
Dell 8/4Gbps FC SAN Module Administrator's Guide
53-1001345-01