Replace An Active Device - AT&T TL92270 User Manual

Bluetooth
Bluetooth setup

Replace an active device

You can replace an active device with a device on the paired devices list even
if you already have two devices on the active devices list.
To replace an active device:
1. Press MENU/
in use.
2. Press CID or
/SELECT.
MENU
3. Press CID or
press /SELECT.
MENU
CID
4. Press or
/SELECT.
MENU
/SELECT again to select Connect.
5. Press
MENU
• When you already have two cell phones on the active
devices list, the handset shows Maximum of 2 devices
can be connected and then Replace an existing
active device with cellular/headset? Press SELECT.
• When you already have one headset on the active
devices list, the handset shows Only 1 headset can be
connected and then Headset A will be replaced from
Active list? Press SELECT.
/SELECT. You are prompted to select a device
6. Press
MENU
on the paired devices list.
CID
7. Press or
replaced, then press
Device removed from active devices list and then
Connecting Cell Phone A to the base...
8. Depending on your cell phone settings, you may
need to press a key on your cell phone to confirm the
connection. When you successfully replace and connect
an active device with a paired device, the handset
displays Device connected.
on the handset when it is not
SELECT
DIR to highlight Bluetooth, then press
DIR to highlight Paired devices, then
DIR to highlight a device, then press
DIR to highlight the device to be
/SELECT. The handset displays
MENU
21
BLUETOOTH
Add cel lular
Add headset
Active devices
Paired devices
SELECT DEVICE
1 Cel l Phone A
2 Cel l Phone B
Connect
Rename
Remove paired
Replace an
existing active
device with
cel lular?
Press SELECT
REPLACE DEVICE
1 Headset A
2 Cel l Phone BC
Device removed
from active
devices list
Connecting
Cel l Phone A
to the base...
Device
connected