Base Message Counter Displays; Message Window Displays - AT&T TL92270 User Manual

Answering system

Base message counter displays

Message window displays

0
0 (flashing)
0-6
1-8
1-99
1-99 (flashing)
1-99 & F
(alternating)
- -
NOTE: When the memory is full, the answering system answers incoming calls after 10
rings and announces, "Memory is full. Enter the remote access code."
No messages.
You need to set the clock (page 30).
Displays for two seconds while adjusting the
telephone base ringer volume.
Displays for two seconds while adjusting the
telephone base speaker volume.
Total number of old messages and memos, or
message number currently playing during old message
playback.
Total number of messages and memos. The number
flashes when there are new or missed messages.
After a power failure, the number in the message
counter flashes to indicate that you need to set
the clock.
Memory is full. You must delete some messages
before recording new messages.
The system is answering a call on the telephone base,
or someone is trying to reach it remotely.
The system is in program mode.
70