Message Playback - AT&T TL92270 User Manual

Answering system

Message playback

If you have new messages, the telephone plays only the new messages
(oldest first). If there are no new messages, the telephone plays all messages
(oldest first).
When playback begins, the handset screen displays PLAYING MESSAGES
and you hear the total number of messages followed by the day and time
of the message. After the last message, the telephone announces, "End of
messages." and the screen displays End of messages. If the recording time is
less than three minutes, you hear, "Less than three minutes to record." (see
Message capacity on page 67)
To listen to messages with the telephone base:
1. Press /PLAY/
Options during playback:
• Press VOLUME
• Press /SKIP to skip to the next message.
• Press /REPEAT to repeat the message currently playing. Press
/REPEAT twice to listen to the previous message.
• Press X/DELETE to delete the current message. The system advances
to the next message.
• Press /
To listen to messages with a handset:
Press MENU/
1.
2. Press /SELECT again to select Play messages.
MENU
3. If there are new and old messages, press CID or DIR to select Play new
msgs or Play old msgs and then press
Options during playback:
• Press EQ
• Press VOLUME
Press 6 to skip to the next message.
•
Press 4 to repeat the message currently playing. Press 4 twice to listen
•
to the previous message.
Press 3 to delete the current message. The system advances to the
•
next message.
Press 5 to stop.
•
The system announces the number of messages, then begins playback. The
message sequence is shown on the handset screen. If there are no recorded
messages, the handset screen shows You have: No message with voice
prompt "You have no message."
to listen to messages.
STOP
to adjust the speaker volume.
/STOP to stop.
PLAY
in idle mode.
SELECT
button to adjust the message playback audio quality.
to adjust the speakerphone volume.
/SELECT.
MENU
68