Replace An Active Device - AT&T TL86103 User Manual

Bluetooth
Bluetooth setup

Replace an active device

If you already have 2 active devices and you want to activate a different one,
you must deactivate one of the 2 active devices.
To replace an active device:
1. Press MENU
Press CID, DIR, /RECORD, or /DELETE to
2.
highlight Bluetooth, and then press
Press CID, DIR, /RECORD, or /DELETE to
3.
highlight Device list, and then press
Press CID, DIR, /RECORD, or /DELETE to
4.
highlight the device you want to activate without
a prefix A: or B:, and then press
Press CID, DIR, /RECORD, or /DELETE to
5.
highlight Connect, and then press
handset displays Only 2 devices can be ready for
connection, and then a list of devices
for deactivation.
6. Press CID, DIR, /RECORD, or /DELETE to
highlight the device to be deactivated, and then
NEXT
press
deactivated or Headset X is deactivated (X represents
the slot of the deactivated device) and you hear a
confirmation tone. Then, the screen displays Connecting
Cell Phone X to the base... or Connecting Headset X
to the base... (X represents the slot of the replacement
device).
7. Depending on your cell phone settings, you may
need to press a key on your cell phone to confirm
the connection. When the new device is successfully
activated and connected, the handset displays
Device connected. You hear a confirmation tone.
NOTE: When adding removing, or replacing a Bluetooth device on the active devices list, all
connected devices are temporarily disconnected until the procedure completes. It may take
up to two minutes to reconnect.
on the telephone base in idle mode.
. The screen displays Cell Phone X is
SELECT .
SELECT .
OPTION .
SELECT
. The
29
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
DEVICE LIST
A:Cel l Phone A
B:Headset A
Cel l Phone B
BACK OPTION
Only 2 devices
can be ready
for connection
DEACTIVATE
A:Cel l Phone A
B:Headset A
BACK NEXT
Connecting
Cel l Phone B
to the base...
DEVICE LIST
A:Cel l Phone B
B:Headset A
Cel l Phone A
BACK OPTION