Table of Contents
Advertisement
To access the following additional screens, use the arrow keys to highlight the option and press
Enter:
•
RAID Properties. See
•
SAS Topology. See
•
Advanced Adapter Properties. See
RAID Properties Screens
There are four screens within RAID properties, all of which are initially accessed by selecting
RAID Properties from the Adapter Properties screen. The first screen displayed is the Select
New Array Type screen:
Enabled BIOS & OS
Enabled BIOS Only
Enabled OS Only
Disabled
Changes to the Boot Support setting are reflected in the Status
field of the Adapter List menu. However, the new setting does
not take effect until you reboot the system.
"RAID Properties
Screens."
"SAS Topology
Screen."
"Advanced Adapter Properties Screen" (page
The SAS controller is controlled by
both the BIOS and OS driver
The SAS controller is controlled
only by the BIOS. This setting may
not be supported by all OS drivers.
For example, it is not possible to
disable an adapter in a Windows
driver.
SAS controller is controlled only by
the OS driver.
SAS controller is not controlled by
the BIOS when the SAS controller
is loaded. However, the adapter is
visible through the Configuration
Protocol.
The drvcfg Utility
26).
19
Advertisement
Table of Contents
