Configuring Properties; Deleting A Team; Setting Up Adapter Fault Tolerance In Netware - HP D5970A - NetServer - LCII Installation Manual

Chapter 8

Configuring Properties

The default AFT properties are suitable for most applications.
To adjust them, follow this procedure.
1. Run HPSet.
2. On the adapter list, select the desired AFT team.
3. Click the Advanced Settings tab.
4. Adjust parameters as required. Click Help for more
information.

Deleting a Team

1. Double-click the Network icon in Control Panel.
2. On the Adapters tab, select the AFT team to delete.
3. Click Remove. A confirmation dialog box appears. Click
Yes.
4. Click Close. Restart Windows NT when prompted.
NOTE
When IPX is used, the frame type for each
adapter in the team reverts to Auto when a
team is deleted. You may need to set it to the
specific frame type to connect to your
network.
Setting up Adapter Fault Tolerance in
NetWare
1. Copy the following lines from the EXAMPLES.TXT file
(on the HP NetServer 10/100TX PCI LAN Adapter Drivers
CD), paste them into the appropriate files, and modify
them. These commands assume the HPANS.LAN and
CHPTX.LAN files are in the system directory
(SYS:SYSTEM) of your server. (Files must be copied from
the HP NetServer 10/100TX PCI LAN Adapter Drivers CD
to your server's hard drive).
Choosing Adapter Teaming Options
31